FREE  DELIVERY ON ALL ORDERS OVER £300

Search site

EPOXY MORTAR LW

A tough, lightweight, epoxy resin mortar for repairing spalled concrete or stone window cills, lintels and columns.

An excellent concrete or stone repair compound to reform original profiles to vertical masonry.

Epoxy Products Epoxy Mortar LW can be laid at depths from feather edge up to 100 mm.

• Tack Primer VG must be applied.

• Easy to apply

• Excellent chemical spillage resistance

• Can be feather edged

• Wide range of colours

Ideal for resurfacing  pub cellar floors, engineering workshops etc.

Epoxy Products Epoxy Mortar can be laid at any depth from feather edge up to 100 mm.

•  Can be applied inside or out

•  Granite hard finish - harder than concrete

•  Outstanding impact resistance

•  Excellent chemical spillage resistance

•  Non slip finish

•  Wide range of colours

EPOXY MORTAR

An excellent concrete resurfacing material to provide strength, outstanding impact and chemical spillage resistance. ‘Fast Cure’ Grade available.

Epoxy Products Epoxy Mortar is an incredibly tough, epoxy resin mortar ideal for concrete repairs, broken bay joint edges and worn steps. It can be used to form ramps and make up differences in floor levels. Also suitable for the  permanent placement of shutter doorway guides into concrete.  

© 2006 EPOXY PRODUCTS LIMITED

• Average coverage - 1.2m² at 6mm depth per 10kg *

 Average coverage-  1.7 m² at 3mm depth  per  10 kg*

The above prices DO NOT include VAT or carriage charges.

These are calculated during the buying process for UK mainland online sales and by email for sales overseas.

* Coverage rates depend on texture and porosity of existing surface.

EPOXY FILLER

An excellent universal epoxy resin filler.  Ideal for concrete crack repair, for filing small blemishes, bolt holes, cracks in window cills, etc.

Exceptionally high adhesive strength and chemical resistance.  

A similar consistency to most ordinary commercial fillers for easy application.

This twin pack epoxy resin is mixed  50/ 50 by volume - you only mix what you need - no waste!

•  Available in 1 kilo packs

•  Can be feather edged  

•  50 / 50 mixing ratio

Health & Safety

More Information

Colour chart

•  Can be applied inside or out

•  Granite hard in less than 2 hours

•  Outstanding impact resistance

•  Excellent chemical spillage resistance

•  Can be feather edged

•  Available in 5 kg and 15 kg twin packs

PATCHING MORTAR FINE GRADE

Fine particles for repairs from feather edge up to 25 mm.

Convenient, long shelf life and super strong repairs.

•  Average coverage 5 kg:  1m² at 2 –3 mm depth*

The most  rapid setting Epoxy Mortar repair compound available today. This twin pack, equal part mix, sets granite hard in less than two hours. For repairing concrete floors with minimum disruption and no wasted product - only mix what you need!

With all the high performance qualities of our Epoxy Mortar, this quick setting mortar will repair damaged concrete, steps and kerbs, fill holes and be suitable for heavy trafficking within 1 -2 hours!

For convenience, the two part, 50/50 mix, enables you to take equal parts from Pack A and Pack B.

Long shelf life - keep some handy!

PATCHING MORTAR

• Average coverage 5 kg:  1m² at 2 –3 mm depth*

      MUST use Epoxy Tack Primer as a primer coat.

For detailed information press the ‘more info and instructions’ button

Epoxy Products Epoxy Mortar WB can be laid at any depth from feather edge up to 25 mm.

• Granite hard finish

• Outstanding impact resistance

• Excellent chemical spillage resistance

• Non slip finish

• Water based - virtually odourless

EPOXY MORTAR WB

With all the performances of our standard grade Epoxy Mortar but can be applied to wet concrete.

Epoxy Mortar WB is ideal for repairing wet, damaged and dangerous concrete or stone.

Outstanding impact and chemical spillage resistance.

• Average coverage - 1m² at 6mm depth per 10kg *

Cures in 8 hours at 10°C ,  48 hours at -10°C

MUST use Epoxy Tack Primer FC as a primer coat.

MUST use Epoxy Tack Primer FC  as a primer coat.

TACK PRIMER FOR STANDARD AND WATER BASED MORTAR

This epoxy resin based primer is used to enhance the physical bond strength of our standard Epoxy Mortar flooring.

•  Excellent tacky surface

•  Superb adhesion

•  Average coverage - 3 sq. mtrs per 0.5 Litres packs

More Info and Instructions

•  Average coverage - 2.25 sq. mtrs per 0.5 Litres packs

TACK PRIMER V G

More Info

TACK PRIMER  FLEXIBLE GRADE

This product will tolerate some substrate movement caused   by heavy plant, vibration, or very cold weather conditions.

More Info

TACK PRIMER FC  

For use with our ‘Fast’ and ‘Cold’ cure Mortar

More Info

MSDS

MSDS

MSDS

MSDS

MSDS

MSDS

MSDS

 PHONE:     0844 33202 88      (local rate)