GARAGE FLOOR PAINT
DESCRIPTION
EPOXY PRODUCTS GARAGE FLOOR PAINT formulated single part urethane resin based system . It offers good resistance to oil and grease and spillages to a range of chemicals used within industry. It provides a hardwearing surface for interior applications.?
USES: It will provide protection to a wide range of floors and is ideally suitable for Garages, Warehouses, Workshops, Plant Rooms, Goods In/Out areas, in fact any floor that is trafficked by fork lift trucks, pallet trucks and pedestrians.
PREPARATION: Surfaces must be clean, dry, sound and free from grease, oil and other forms of contamination. Concrete laitance should be removed by acid washing using EPOXY PRODUCTS CONCRETE ETCH and rinsed thoroughly. For best results Vacuum Track Shot Blasting is recommended.? This coating may also be applied onto previously painted floors providing the existing floor paint is sound and well abraded.
MIXING: Simply stir well before use. Add 10% White Spirit for the first priming coat.
APPLICATION: Apply the coating by brush or roller. Two coats are normally required for maximum resistance. For best results apply the second application within 24 hours of the first. Anti-slip aggregates (carborundrum) can be applied to the floor paint to provide some slip resistance particularly in wet areas.
HEALTH AND SAFETY: As some people find Epoxy based products irritant to the skin, all users are recommended to use barrier cream and thoroughly wash with soap and water after use. Avoid skin and eye contact. If eye contact is made then rinse with clean water and seek immediate medical advise.
PRODUCT DATA
COVERAGE
5 Litres will cover up to 50 square metres depending upon the porosity and texture of the substrate.
HARDENING TIME
Tack free in 8 hours @ 20 C. Second coat in 12 hours @ 20 C.
Full hardness in 7 days.
CHEMICAL RESISTANCE
Limited resistance to spillages of chemicals commonly met within industry. Seek Technical advice from EPOXY PRODUCTS TECHNICAL DEPARTMENT.
TOOL CLEANING
Clean all tools with White Spirit.
COLOUR RANGE
Slate Grey, Granite Grey, Nimbus Grey, Tile Red, Empire Green, Caramel and Solent Blue
Whilst Epoxy Products Limited endeavours to ensure that any advice, recommendation, specification or information it may give is accurate and correct, it can not, because it has no direct or continuous control over where or how its products are applied, accept any liability either directly or indirectly arising from the use of its products, whether or not in accordance with any advice, specification or information given.
EPOXY PRODUCTS LIMITED
Manufacturers of High Performance Floor Coatings and
Re-surfacing screeds.
© 2006 EPOXY PRODUCTS LIMITED
PHONE: 01202 891 899 FAX: 01202 896 983 EMAIL: sales@epoxyproducts.co.uk
UNIT 7, HAVILAND ROAD FERNDOWN IND. EST. WIMBORNE
DORSET
BH21 7RZ