The leading manufacturer in the UK of industrial floor paints, concrete repair products and resurfacing screeds since 1983
EPOXY PRODUCTS LIMITED
Telephone: 01202 891899
Email: sales@epoxyproducts.co.uk
We have been manufacturing a range of concrete repair and resurfacing products for almost three decades. All offer outstanding strength, wear resistance, chemical resistance, impact resistance and long term performance.
TACK PRIMER FOR MORTAR WB
TACK PRIMER FAST CURE
MUST USE with“Fast Cure”and “Cold Cure”EPOXY MORTAR.
11” PREMIUM STEEL TROWEL
A good quality 11" steel trowel.
CLEANING SOLVENT - 2.5 Litres
For cleaning tools and equipment used to apply our products.
SPIKED SHOES - 1 Size
One size spiked shoes for walking across wet resin floors.
GRIP GLOVES
Suitable for handling roller frame handles and steel trowels for extra safe grip.
For marking out Epoxy Line Coating and straight edges.
50mm x 50 metres per roll.
MULTI PURPOSE CLEANER 5 Litres
Great Value concentrated floor cleaning solution Very good with Concrete and Epoxy floors.
EPOXY MORTAR FAST CURE
LARGE MIXING PADDLE
An attachment for an electric drill. For fast efficient mixing of all resin based products.
EPOXY MORTAR COLD CURE
EPOXY MORTAR UNDERWATER
This can be used under water or in very wet conditions. Recommended for reinstating structures exposed to heavy battering from the sea. Used for concrete jetties, fixing slip bricks and other submerged concrete and steel issues.
Primer not required.
MUST USE Epoxy Tack Primer to aid adhesion
This product will tolerate some substrate movement. Used with any of our EPOXY MORTAR
EPOXY MORTAR LIGHTWEIGHT
Excellent concrete or stone repair compound to re-form original profiles to vertical masonry. E.g. window sills, lintels and columns. Lay from feather edge up to 100 mm.
MUST USE Epoxy Tack Primer VG as a primer
EPOXY MORTAR WATER BASED
Scroll down for tools and equipment
Tough concrete repair/resurfacing material providing outstanding impact and chemical spillage resistance. Ideal for concrete repairs, broken bay joint edges and worn steps. Can also be used to form ramps and make up differences in floor levels, resurfacing pub cellar floors, engineering workshops. Can be laid at any depth from feather edge up to 100 mm. Apply inside or out in dry conditions.
All the properties of our standard EPOXY MORTAR above, but it can be laid in damp conditions.
MUST USE Epoxy Tack Primer to aid adhesion
The above prices DO NOT include VAT or carriage charges. These are calculated during the buying process
for most UK mainland online sales and confirmed by email for North Scotland, off shore or sales overseas.
Need someone to apply our products? Click here
All the properties of EPOXY MORTAR above except it will
cure in 8 hours at +10°C , 48 hours at -10°C
MUST APPLY Epoxy Tack primer FC as a primer coat
All the properties of our standard EPOXY MORTAR above except it will cure in 2 hours at 20°C
MUST APPLY Epoxy Tack primer FC as a primer coat
Ideal for concrete crack repair, small blemishes, bolt holes, and other small imperfection. Exceptionally high adhesive strength and chemical resistance. A similar consistency to most ordinary commercial fillers for easy application but with the exceptional strength of an Epoxy.
Mixed 50/ 50 by volume - NO WASTE!
CRACK REPAIR LV
This Low Viscosity product exhibits superb penetrating powers even into the finest of cracks. It is a superb impregnating sealer for strengthening of weak porous
cement screed, concrete or brickwork.
CRACK REPAIR T
A high viscosity, Thixotropic epoxy resin paste for wall tie placement, the sealing of wide vertical cracks and as a excellent gap filling adhesive for concrete, stone, brickwork and timber. b
For repairing floors, steps, kerbs, etc. Amongst the best EPOXY MORTAR repair products available. Twin pack, equal part mix, sets in less than two hours. Can be feather edged.
Primer not required.
Mixed 50/ 50 by volume - NO WASTE!
All the properties of our Standard EPOXY PATCHING MORTAR but with a finer aggregate for a smoother finish.
Primer not required.
Mixed 50/ 50 by volume - NO WASTE!
Scroll down for tools and equipment
EPOXY FILLER
EPOXY PATCHING MORTAR
EPOXY PATCHING MORTAR - Fine Grade
EPOXY MORTAR
50mm MASKING TAPE
Max Power Multiuse Epoxy Putty for filling cracks and joints in concrete, stone, ceramic tiles and timber. Can be applied to wet surfaces - even under water! Mix in equal proportions. Rapid hardening and versatile - also used as a grout adhesive for tiles in swimming pools, tile repairs, plumbing repairs.
Mixed 50/ 50 by volume - NO WASTE!
Max Power Multiuse EPOXY PUTTY
TACK PRIMER FOR MORTAR
EPOXY TACK PRIMER will promote the adhesion of our Epoxy Mortar to concrete and with its high“tack”enables the floor layer to spread the Epoxy Mortar much easier.
TACK PRIMER VG
50mm MASKING TAPE (twin pack)
As above but in a money saving pack of two.
SAFETY GLASSES
Protects eyes when mixing and applying epoxy products.
FREE DELIVERY ON ALL ORDERS OVER £300
Email: sales@epoxyproducts.co.uk © 2006 - 2023 EPOXY PRODUCTS TEL : 01202 891899
Epoxy Patching Mortar
Epoxy Mortar
Epoxy Mortar
EPOXY TACK PRIMER FLEXIBLE GRADE
CLEANING SOLVENT - ½ Litre
For cleaning tools and equipment used to apply our products but in a handy ½ litre with an atomiser for ease of use.
20 Litre MIXING BUCKET
A strong 20 Litre plastic bucket with Lid
BOX OF Vinyl Gloves
1 box of 100 pairs of disposable vinyl gloves. Great for keeping your hand clean.
2” PAINT BRUSH
Inexpensive, W/Bristle wood disposable 2”brush for apply TACK PRIMER.
GRIP GLOVES - Pack of 2
As above but in a money saving pack of 2
